Name Cartouche Slim Charging Pad
MSRP L$ 250 (M/T version), L$ 600 (C/M version)
XVS server xvendor:0
Permissions copy, modify or modify, transfer
Land impact 3
Attachment point —
Function NS/ACS unit charging pad
SKU 02-0184-G (C/M version)/02-0184-T (M/T version)
Requirements none
First release XXXX
Latest release 1.02
Related products TBD




——————————————————————————————————

c a r t o u c h e

minimalist charging platform

for ACS and SXD compatible robots

——————————————————————————————————

Copyright © 2020, 2023, Nanite Systems Consumer Products. All rights reserved.

For additional information, see: http://nanite-systems.com


Welcome to the Cartouche charger! This low-profile, efficient charger design is a new addition to our catalogue meant to supplement existing NSFRG Induction Charger and NSBSD Asset Recovery Center (ARC) installations. It is ideal for providing unobtrusive charging functionality in public spaces where ease-of-use is a priority, while providing best-in-class memory efficiency and lightweight particle-driven visuals.


—————————————————
UPDATE INFO (1.02)
—————————————————

Fixed a bug with ARES and degrading batteries.

Now defaults to a white appearance.


—————————————————
INSTALLATION AND SETUP
—————————————————

The Cartouche charger can be used immediately after rezzing. Please note that the holographic screen does extend asymmetrically from the charger while in use and will require clearance.

The Cartouche charger is not designed to be relinked. If you wish to combine it with another linkset, the link numbers of its dependent prims must be preserved, and auto-sit must be disabled. See the Safe Relinking Guide for theory and instructions on how to perform safe re-linking.


—————————————————
USAGE INSTRUCTIONS
—————————————————

ACS units must accept tammypeluso133.resident (d45552db-1a7d-4a57-b97d-c435474bd39d) as a trustedcreator in their 99 UnitOnly configuration file before they can connect to the charger. The charger expect and requires that the ACS unit use a compatible (electric) power source.

Nanite Systems units may simply sit on the charger to activate it. To use auto-sit over the public bus, the unit will need to permit the charger's owner to use remote access. This can be enabled via the manage > policies > access menu, the manage > access menu (on older versions), or with the command /1 <prefix> access remote on

The charger may also be configured to automatically sit units that approach it. Shift-click on the charger (touch it) when it is not in use to change auto-sit methods. NS units may use the standard (public bus) mode without additional accessories. To auto-sit ACS units, they must have an RLV relay attached, and the charger must be set to RLV relay mode for auto-sit.

To abort charging, the unit may unsit (stand up) or walk off the charger at any time. Charging will automatically terminate frictionlessly. If the unit is unable to disconnect, NS units may still terminate charging with the @charge abort command.


—————————————————
DETAILED CONFIGURATION
—————————————————

Nanite Systems units may also access the standard @charge command to make more specific configuration changes to the charger. These changes can only be made by the charger's owner. If you own a charger and a robot, you may use local command access to operate the pad through your robot while the robot is standing on the charger. See the Local Command Access article for detailed instructions on how to use local command access.

/1 <prefix> charge speed <rate>
Set the charging speed to <rate> kW.
The default charging speed is 40 kW.
The maximum charging speed is 200 kW.
Values of 115 kW and above will cause strong interference in a 10 m radius around the charger, and are not recommended for public spaces.
Charging sound effects are louder at higher charging speeds.

/1 <prefix> charge color
Save the unit's color to the charger. This color is visible during the connection process, and when an ACS unit is connected.

/1 <prefix> charge reset
Reboot the charger, discarding all settings changes.

/1 <prefix> charge autosit [on|off|relay|toggle]
Control autosit options (see 'usage instructions,' above).


—————————————————
MORE INFORMATION
—————————————————

To see how the Cartouche charger's speed compares to other charging methods, see http://nanite-systems.com/batteries

For additional help and customer support, visit http://support.nanite-systems.com or contact the Nanite Systems User Group in-world.

To obtain redeliveries, replacements, and updates of no-copy products, contact rhet0rica.resident. You will be required to return your old versions.