Report #2920
@db set repair.autorepair not disabling autorepair.
| source | galatealindholm |
|---|---|
| version | 0.1.1 |
| status | SUP |
| priority | TRI |
| target fix | |
| report date | 2023-07-15 19:02:21 |
| report | When testing whether disabling autorepair works using the @db set repair.autorepair 0 command, I get the proper response "Modified repair setting autorepair: 1 --> 0" which should turn it off. Doing the reverse also results in the proper response. But damage still triggers autorepair after a short delay. |
Additionally, after the service restart, if integrity is less than 100, the integrity display on the HUD shows as "0000/XX" with the right-hand number being the unit's current integrity. This persists after repair until full-heal, when it disappears, though can still be seen as "0000/100" if mouselook is entered.
The 0000/ part is the shield health. Let's file a new bug for that.